Parts of a Quilt: An Illustrated Guide (2026)
Every quilt shares the same anatomy: a top made of blocks, sashing and borders; a layer of batting; a backing; and binding around the edge. Here is what each part is called and what it does.

In This Article
Quilt Anatomy in Brief
- Top: blocks, sashing, borders
- Batting: the warm middle layer
- Backing: the bottom layer
- Quilting: stitches through all layers
- Binding: finishes the edges
A quilt is traditionally three layers: a woven top, a layer of batting or wadding, and a woven back, joined by quilting stitches through the face of the fabric. The top carries most of the design and has its own named parts.
The Three Layers
| Layer | What It Is |
|---|---|
| Quilt top | The decorative front, usually pieced, appliquéd or whole cloth |
| Batting (wadding) | The insulating middle layer; see types of batting |
| Backing | The bottom layer, usually cut larger than the top before quilting |
Parts of the Quilt Top
- Block: a unit of the design, usually square; see quilt block names.
- Setting: how blocks are arranged, such as straight or on point (turned 45 degrees).
- Setting triangles: fill the edges when blocks are set on point.
- Sashing: strips between blocks that frame them.
- Cornerstones: small squares where sashing strips meet.
- Borders: strips around the edge of the top, from a single plain border to several pieced ones.
Quilting and Binding
- Quilting stitches: hold the layers together and add texture, by hand, machine or longarm; see hand vs. machine vs. longarm.
- Quilting designs: from straight lines and stitch in the ditch to all-over meanders and feathers.
- Binding: a strip that wraps the raw edges of all three layers, applied last; see applying binding.
- Label: many quilters stitch a label to the back with the maker's name and date.
- Hanging sleeve: a fabric tube on the back for hanging a quilt on a rod.
Quilt Sandwich Tips
- Cut the backing and batting a few inches larger than the top on every side.
- Smooth the backing face down and tape or clamp it taut.
- Lay the batting, then the top, face up, on top.
- Baste with safety pins, thread or spray baste, working from the center out.
Sources
Frequently Asked Questions
What are the three layers of a quilt?
The quilt top, the batting (or wadding) in the middle, and the backing. Quilting stitches pass through all three to hold them together.
What is sashing on a quilt?
Strips of fabric sewn between blocks to separate and frame them. Small squares where sashing strips meet are called cornerstones.
What is the difference between a border and binding?
A border is a strip of fabric around the outside of the quilt top, part of the design. Binding is the narrow strip that wraps and finishes the raw outer edge of all three layers.
What is a quilt sandwich?
The three layers, top, batting and backing, stacked together and basted ready for quilting.



